What Problems Should Be Paid Attention To When Cleaning The Fuel Tank Of The Freight Elevator?

First, the hydraulic lift freight elevator should keep the hydraulic oil clean


The hydraulic elevator should keep the hydraulic oil clean


Store the oil in a clean location and be careful when changing oil or refueling. Only use a cleaning funnel with a fine mesh filter to pour oil from the container into the tank. Of course, the oil you use must be the type recommended by the equipment manufacturer.


The oil can only be poured from the container into the tank using a clean funnel equipped with a fine mesh filter. Of course, the oil you use must be the type Recommended by the device manufacturer.


Second, the freight elevator should keep the system clean


The elevator should keep the system clean


Regularly change oil and filter. Good hydraulic fluids contain a variety of additives that prevent oil from damaging or clogging system parts. However, these additives will lose their effectiveness over time. Therefore, the oil should be replaced regularly to ensure that the additive works. The filter can only absorb a limited amount of dirt particles and other impurities from the oil. Replace the filter at the recommended intervals to keep the system clean.


The oil should be replaced periodically to ensure that the oils are effective over time. The oil should be replaced periodically to ensure that the are are effectively used. Filters can only Absorb a limited amount of dirt and other impurities from oil. Replace the filter with recommended cycles to keep the system clean.


Third, the freight elevator should be regularly drained and refueled.


Third, the ladder should be oil and refuel regularly


Regular discharge of water and sediment from the tank is important to remove impurities from the oil, but it is also important to vent the entire hydraulic system on a regular basis. This is the only reliable way to completely remove system impurities, oxidized hydraulic fluids and other hazardous materials. The recommended clean hydraulic fluid should then be reintroduced into the system.


Regularly releasing water and sediment in the tank is important for removing impurities in the oil, but it is also important to regularly empty the entire hydraulic system. This is the only reliable way to completely remove the impurities of the system, the hydraulic oil and other Harmful substances that are oxidized. The recommended clean hydraulic oil should then be added to the system.

If the hydraulic oil of the rail lift freight elevator is completely contaminated, especially when the pump is damaged, the oil in the fuel tank must be cleaned. The oil is flowed through the oil cleaning device until the oil contamination indicator shows that the oil is in a satisfactory state.


If the hydraulic oil of the guide elevator is completely polluted, especially when the pump is damaged, the oil in the tank must be cleaned. The oil is flowing through the oil cleaning device until the oil pollution indicator shows that the oil is in satisfactory condition .